Introduction to the working principle and characteristics of the relay

Posted by: admin  • Information section:Home appliance

A relay is an electronic control device that has a control system (also called an input loop) and a controlled system (also called an output loop). It is usually used in an automatic control circuit. It actually uses a small current to control the larger An "automatic switch" of current. Therefore, it plays the role of automatic adjustment, safety protection and conversion circuit in the circuit.

1. Working principle and characteristics of electromagnetic relay

Electromagnetic relays are generally composed of a core, a coil, an armature, a contact spring, and the like. As long as a certain voltage is applied to both ends of the coil, a certain current flows in the coil, thereby generating an electromagnetic effect, and the armature will absorb the pulling force of the return spring against the iron core under the action of the electromagnetic force attraction, thereby driving the armature. The moving contact is in contact with the stationary contact (normally open contact). When the coil is de-energized, the electromagnetic suction force also disappears, and the armature returns to the original position at the reaction force of the spring, so that the movable contact is attracted to the original static contact (normally closed contact). This is sucked and released, thereby achieving the purpose of turning on and off in the circuit. For the "normally open, normally closed" contacts of the relay, it can be distinguished as follows: a static contact that is in an open state when the relay coil is not energized, called a "normally open contact"; a static contact that is in an on state It is a "normally closed contact".

2. Working principle and characteristics of thermal reed relay

The thermal reed relay is a new type of thermal switch that uses temperature sensitive magnetic materials to detect and control temperature. It consists of a temperature-sensitive magnetic ring, a constant magnetic ring, a reed switch, a thermally conductive mounting piece, a plastic substrate, and other accessories. The thermal reed relay does not use coil excitation, and the magnetic force generated by the constant magnetic ring drives the switching action. Whether the constant magnetic ring can supply the magnetic force to the reed switch is determined by the temperature control characteristics of the temperature sensitive magnetic ring.

3. Working principle and characteristics of solid state relay (SSR)

The solid state relay is a kind of four-terminal device with two terminals as the input terminals and the other two terminals as the output terminals. The isolation device is used to realize the electrical isolation of the input and output.
Solid state relays can be classified into AC type and DC type according to the type of load power supply. According to the switch type, it can be divided into normally open type and normally closed type. According to the isolation type, it can be divided into hybrid type, transformer isolation type and photoelectric isolation type, and the photoelectric isolation type is the most.
 


A relay is an electronic control device that has a control system (also called an input loop) and a controlled system (also called an output loop). It is usually used in an automatic control circuit. It actually uses a small current to control the larger An "automatic switch" of current. Therefore, it plays the role of automatic adjustment, safety protection and conversion circuit in the circuit.

1. Working principle and characteristics of electromagnetic relay

Electromagnetic relays are generally composed of a core, a coil, an armature, a contact spring, and the like. As long as a certain voltage is applied to both ends of the coil, a certain current flows in the coil, thereby generating an electromagnetic effect, and the armature will absorb the pulling force of the return spring against the iron core under the action of the electromagnetic force attraction, thereby driving the armature. The moving contact is in contact with the stationary contact (normally open contact). When the coil is de-energized, the electromagnetic suction force also disappears, and the armature returns to the original position at the reaction force of the spring, so that the movable contact is attracted to the original static contact (normally closed contact). This is sucked and released, thereby achieving the purpose of turning on and off in the circuit. For the "normally open, normally closed" contacts of the relay, it can be distinguished as follows: a static contact that is in an open state when the relay coil is not energized, called a "normally open contact"; a static contact that is in an on state It is a "normally closed contact".

2. Working principle and characteristics of thermal reed relay

The thermal reed relay is a new type of thermal switch that uses temperature sensitive magnetic materials to detect and control temperature. It consists of a temperature-sensitive magnetic ring, a constant magnetic ring, a reed switch, a thermally conductive mounting piece, a plastic substrate, and other accessories. The thermal reed relay does not use coil excitation, and the magnetic force generated by the constant magnetic ring drives the switching action. Whether the constant magnetic ring can supply the magnetic force to the reed switch is determined by the temperature control characteristics of the temperature sensitive magnetic ring.

3. Working principle and characteristics of solid state relay (SSR)

The solid state relay is a kind of four-terminal device with two terminals as the input terminals and the other two terminals as the output terminals. The isolation device is used to realize the electrical isolation of the input and output.
Solid state relays can be classified into AC type and DC type according to the type of load power supply. According to the switch type, it can be divided into normally open type and normally closed type. According to the isolation type, it can be divided into hybrid type, transformer isolation type and photoelectric isolation type, and the photoelectric isolation type is the most.



Tagged:

read ()  •  Jun 15, 2019  •  Edit


YOU MAY ALSO LIKE:

image

Idea: Using a single-pole double-throw relay to control the

Electronic time relay circuit diagram

Date: Jun 15, 2019  | Click 17 times

image

In the circuit diagram, S1 is the mode selection switch; S2

thermal relay

Date: May 30, 2019  | Click 20 times

image

The working principle of the thermal relay is that the curre

What is the gas relay and its role introduction

Date: Mar 11, 2019  | Click 228 times

image

Gas relay
Gas relay (also known as gas relay) is a kind of p

The working principle of leakage current relay

Date: Jan 09, 2019  | Click 28 times

image

Leakage relayLeakage relay is a detection line contact (leak

copyright

© 2018-2019 www.loveelectronics.net Corp.All Rights Reserved.